Samsung Odin Download

Samsung Odin is a Windows-based ROM flashing tool for Samsung smartphones and Tablets. It can be used to flashing, root, partition, and update new OS for Samsung android smartphones and tablets. Including Samsung’s latest phone and tablets (Samsung Galaxy Note, Samsung S9 plus, etc.). Odin is Windows-only software, providing no support for other operating systems, though it is possible to use Wineskin on the Odin executable, allowing it to run on OS X. Now you can be downloading the Latest Odin flash tool from our Odin Download page.

Odin download for PC

Samsung Odin3 v3.13.1 is the latest version that has been released for Samsung Galaxy devices recently. The latest version of Odin is available for Windows with the Win OS Library as well as the Mac OS with the MAC OS Bundle. If you want to use it on Mac OS, all you need to do is extract the S1 Plugin bundle and use it.

Latest Update of Odin download v3.13.1

Odin3 v3.13.1 comes up with some important bug fixes and improvements and it supports the new compression method implemented by Samsung on its firmware files. It comes in support of flashing the latest Android 8.0 Oreo-based Samsung Experience 9.0 firmware ROMs. Odin enables you to upgrade your phone’s software or the firmware build number, flash the full stock firmware update, and restore Samsung devices to complete stock. Odin3 v3 .13.1 supports all the latest phones like the Samsung Galaxy S8, S8 Plus, Note 8, Galaxy S9, S9 Plus, and all the previous handsets as well.

System Requirements for Download Samsung Odin

  • Windows Computer
  • A USB cable to connect the PC and the Device
  • Install the latest Samsung USB drivers
  • PIT and TAR (Samsung Android ROM files)
  • The download supported Odin Version for your device

Steps Guide to Odin Download

  1. Find Odin Firmware Files
  2. Extract the Firmware Files
  3. Install the Right Drivers
  4. Install Odin on Your PC
  5. Put Your Phone in Download Mode and Connect to PC
  6. Flash the Firmware Files

Odin free download

Samsung Odin flashing process will begin and should take about 5/6 minutes but don’t be alarmed. When your device finally boots up, you should now be running your desired firmware. If you want to check that the correct firmware was installed, you can follow the below route on your android Smartphone, tablet, or any other android device.

Settings –> About Device –> Software Information
Firmware number located under the “Baseband version” on your device.

Special Points to Remember:

  • Odin is officially provided by Samsung. So, if you encounter any issues while using this tool, contact the Samsung support team.
  • Using Odin for flashing stock ROM, custom ROM, CWM or TWRP recovery, etc., is very easy. Just connect your Samsung device to the computer in Download mode, load the .tar.md5 file in Odin, and flash the file on your device.
  • If you use Odin to root your Samsung Smartphone or Tablet, you will lose your device’s warranty. Also, it is important to take a complete backup of personal data in your Samsung Android device before using the Odin tool.

Odin Flash

  • Stock ROM flash with Odin download
  • Flashing a custom ROM
  • Root Package
  • Custom kernel
  • Wrapping up

Download Samsung Odin All Versions

Samsung Phone Flashing with Odin Download Tutorial

Odin software is a firmware flashing tool for all Samsung phones and tablets including Galaxy S9 plus, S8, S7, S6, S5, S4, Note 5, Note 4, Note 3, and Tab S series, etc. Samsung releases the official update, then you can download that file and install it using Odin download software. You can follow the step by step below.

Samsung Odin Features

  • Flash Stock Firmware
  • Flash Custom Firmware (Flashing Custom ROM)
  • Flash Recovery File (TWRP)
  • Flash Kernels ( .tar/.zip/.img)
  • Flash Root Package (MD5 and .tar files)

Odin gets updated with time changes, as of this writing Odin 3.12.3 is the latest. Note: We always recommend you to get the latest version as it will be a more stable and improved interface.

Odin download XDA

  • Make sure to Backup all the important data(contact list, Media files, etc.)
  • Windows Computer
  • Install latest Samsung USB drivers (You can download “here”)
  • Enable your device download mood(you can see “here” how to get your device download mood)
  • A USB cable to connect to the PC and the Android device.

How to use Odin

  • Step 1: Download & Install the Latest Version of Samsung USB Driver on your Computer.
  • Step 2: Download the Stock ROM or Custom Firmware and Extract it.
  • Step 3: Download Odin 3.13.1 & Extract the latest version of Odin on your Computer.
  • Step 4: Right-click on the Odin setup and click ‘Open as Administrator’
  • Step 5: Boot Samsung phone into ‘Download mode’ and connect to the USB cable
  1. Power off your phone.
  2. Press and Hold Volume Down+ Home + Power Button.
  3. When your device vibrates, leave only the Power Button.
  4. To enter download mode, click the Volume up button.
  • Step 6: Connect the Samsung device and computer through the USB cable.
  • Step 7: Click on ‘PDA’ or ‘AP Button to Load the Stock Firmware or Custom Firmware that you want to Flash.
  • Step 8: Click on Start Button to begin the Flashing Process.
  • Step 9: Click on Start Button to begin the Flashing Process.
  • Step 10: Reboot your Device and you can unplug your device safely.

Samsung USB Driver for Mobile Phones

Samsung USB Driver for Mobile Phones is a driver for Android app developers using Windows operating system. It allows you to connect Samsung devices (tablets and smartphones) to a Windows PC via USB, and you can use android firmware updates and all.

Do you need this Samsung USB driver?

If you simply want to connect your phone and view the files on it, any Windows PC will automatically download the necessary Samsung driver. You need this Samsung USB Driver for Mobile Phones if you are updating android firmware and test some developing Android apps.

How to Use the Samsung USB driver?

To use Samsung USB Driver for Mobile Phones Simply download, Samsung USB driver and unzip the file, then follow on-screen instructions to install the drivers. Then you can use your Android devices to update firmware, restore and repair your current version. You can then access devices like the Samsung Tablets and Galaxy S9 Plus, S8, etc. in your development application.

How to Install Samsung Android USB Drivers on Windows PC?

  • Step 1:- Download Samsung Android USB Drivers. You can download this set of drivers from the page below
  • Step 2:- Now you can unzip your download Samsung Android USB drivers setup.
  • Step 3:- Now, click on the main file of Samsung USB Drivers and launch the installation file by double-clicking on it.
  • Step 4:- Now the Samsung USB Driver for mobile phones on your computer to continue to press the [Next] button.
  • Step 5:- Now press the install button
  • Step 6:- Installation will take several minutes to complete the task. After that, you can see a successful message at the end of the installation process.
  • Step 7:- After having a successful message on your desktop’s screen you can see an option with a Finish button. You need to click on to is and then you are requested to close every running application and another thing from your PC.
  • Step 8:- Congratulations! You have successfully installed Samsung Android USB Drivers on your Windows PC.

This was all about Flashing Stock Firmware on Samsung. For more such articles, keep visiting our Pages. Or you can also subscribe to our Newsletter so as to receive timely notifications of our posts and not miss any update of the technology world.